BroncoII4x4.com

How much were those tires?

What all do you plan to do with it?

It wouldn't hurt. Just wipe it off with a rag before and after sanding so you can see everything clearly. Make sure to clean it very well after sanding to get all the dust off. I just went to Napa and got some cheapo spray paint and it came out sweet.

After you get all the rubber replaced take off your tire rack and give it a good coat of black spray paint . Really dresses it up and makes it look nice.

If i remember correctly there is 2 styles of driveshaft in bronco2s. My haynes manual has both in it, although I can't find it .

Why would you want to put a 3.0 in instead of a 4.0?

Same thing was happening to me a while ago. After I over-heated it it has worked ever since.

Depends on your budget and how much you would use it. Example trail rig or daily driver. Might as well spend some money on a good one instead of replacing it. Go with a Warn if you have the money.

Depends on how bad the strikers are rusted in. Tried to take some off at a junkyard, rusted. Shitty thing is that it's an allen key. Used a lot of liquid wrench and torqued as hard as i could, couldn't budge em. Have fun :). That or just cut em... EDIT: From the look of the pictures yours have a sta...

Depends on how bad the strikers are rusted in. Tried to take some off at a junkyard, rusted. Shitty thing is that it's an allen key. Used a lot of liquid wrench and torqued as hard as i could, couldn't budge em. Have fun :). That or just cut em...

Check to see that all your connections are sound and that it's getting good ground.

To add on to what TJ said, check all your connections and see if there is moisture in the distributor cap.
Good luck

The linkage for the tailgate handle probably came off.. Same thing happened to me. The linkage fits into a hole inside the tailgate, and when connected the handle shouldn't spin. Take off the plastic cover on the inside of the tailgate and feel in there for the metal linkage. If it feels completely ...

Go to an auto parts store and see if you can get a new striker with new rubber on it. It vibrates a lot since the lock doesn't fasten down on it enough with crappy rubber. (Picture # 2 and 3)